Friday, February 13, 2015
Roadtrip 2014: Cleaning your teeth, how do I do it
Keeping fresh and clean is important for most people, and that includes me.This time I thought I would tell you about the simplest thing.
I always follow a ritutal of cleaning my teeth before bed time, and after breakfast time. It is important to feel fresh in my mouth, and they say it preserves your teeth.
I use a simple method to preserve fresh water. I have water in 5 liter buckets that I use to distribute into smaller buckets like 1 liters. And then use it to drink and also wash my teeth.
I usually put some toothpaste on the toothbrush, and make it stick with my tung. And then put just a little water in my mouth (keeping it in). After that I insert the toothbrush and wash the teeth with a close mouth, carefully. After a while I let some "yuck" escape the mouth and so on, dripping on the floor. After I´m ready cleaning the teeth. I thoroughly wash the mouth clean from the toothpaste with pure water. You should not swallow any of the toothpaste, its not good for you, usually contains fluoride, that's bad for ya. I also clean the tongue with the brush.
Thursday, January 29, 2015
Roadtrip 2014: Ängsö morning, installing solar power and relaxing
Still in Ängsö: Early morning and time for breakfast. Using favorite müsli in a cup, and then pouring water on it. Sounds pretty bad to use water instead of milk or processed sour milk but.., nah, it´s ok, I´m used to it. Along that goes some pretty fresh fruit like peach.
|
|
|
|
|
Saturday, January 17, 2015
Roadtrip 2014: Sleeping place Ängsö
I decided to move, go back. Cause I remember driving past a smaller rv on the way to Långholms bridge, and I thought it might be nice with some company.
However, they were gone when I got back.
To be continued..
However, they were gone when I got back.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Saturday, December 13, 2014
Roadtrip 2014: Heading for Ängsö
Finally I was back on track. The sun was shining, and I was heading for the island Ängsö, a nature reserve about 20-30 km from Västerås (where I live). I like to be close to home first night, incase I´ve forgotten something important.
One of the first thing you need to consider for a happy roadtrip is temperature. For a roadtrip to be succeed I think the weather is (very) important. No moisture and cold and you sleep well in the car... and everything stays dry and nice. Rain is really bad news, at least when on a vacation and you feel your time is limited before you have to go back to work. If it gets to cold in the night you wake up freezing, and you need to put on some more blankets and so on. I prefer an even temperature, not so easy in a car without any extra isolation.
Some pictures of the swedish landscape.
|
|
|
|
|
|
|
|
![]() |
| Even though this place has toilets I had to much memories from the adolescents last time, so decided to try to find another place for the night. |
More in the next post.
Wednesday, November 26, 2014
Testing out the bike holder on the car
Since my car lacks towbar (hitch?), I must use something else to hold my bike. I do like to have a bike with me on the roadtrips. A bicycle is one of the best way to explore a place! Walking is nice but takes to much time. A Bicycle has just about the right speed to see everything. I also like that it is a silent transport, so that I can listen to the nature or some podcast along the way.
This bike carrier is installed using the straps on the tailgate. I also used it on previous Kia car. Worked very good on that car. I bought the bike carrier on Biltema for 499 Swedish crones (about 70 dollar). It is suppose to fit most cars with a boot cover that is sloping somewhat. It is pretty easy to install on the car, you just have to adjust the straps to fit and do a tidy installation, so the straps doesn't hook on to something when you drive.. I have adjusted the lower tailgate attachment, the original doesn't really do the job as good as these one.
|
|
|
|
Tuesday, August 26, 2014
Installing extra battery in the car
Well since I am about to go on at roadtrip I need extra power. The car battery just wont be enough when it rains and a lot of electrics (computer, charging mobile phone, camera and so on, at least that is my motivation for getting it) is used. I don't like to have to start the engine to charge the battery all the time, it´s bad for the environment.
This marine 80 amp 12 volt Tudor Exide (lead) battery was bough about a year ago. I keep it in the apartment on the winter so it wont get frozen. I continuously charge the battery with a ctek charger about every month since a battery like this gets damaged if it gets below a certain voltage.
Well getting ready, now in the car, but not connected fully..
This marine 80 amp 12 volt Tudor Exide (lead) battery was bough about a year ago. I keep it in the apartment on the winter so it wont get frozen. I continuously charge the battery with a ctek charger about every month since a battery like this gets damaged if it gets below a certain voltage.
![]() |
| The battery is connected to the car battery through a big switch. It can then be charge from the car alternator when the switch is on. I installed the battery cables earlier, you can read about it here. |
![]() |
| Since I did the same thing on my previous car I didnt think it was a big thing. Here you read about previosly installation. |
Sunday, August 24, 2014
First night in the Starlet! (Björnön)
After installing the bed I decided to go try it out. I decided to go the island Björnön, that place is usually very nice. I now the area and so on. That island is very close to my home (about 12 km), and there are a bridge so you can drive over to it.
I think it is the third time I sleep in this parkinglot. However the first one with the Toyota Starlet car. I was exited to try it out! Will the bed be ok? Is there something I need to improve and so on..
Of course there was a car in the middle of the night that found it fun to skid around in the parkinglot, waking everybody. Small stones were flying, but it did not hit the car (I think). Thankfully. You wake up by hearing some engine sound, tires turning and stones flying. Always the same story.. When you are newly awake you don't get what is happening the first seconds. Well after a while I could go back to sleep again.
I think it is the third time I sleep in this parkinglot. However the first one with the Toyota Starlet car. I was exited to try it out! Will the bed be ok? Is there something I need to improve and so on..
Of course there was a car in the middle of the night that found it fun to skid around in the parkinglot, waking everybody. Small stones were flying, but it did not hit the car (I think). Thankfully. You wake up by hearing some engine sound, tires turning and stones flying. Always the same story.. When you are newly awake you don't get what is happening the first seconds. Well after a while I could go back to sleep again.
| A view of the driver-side of the car. As you can see a black fleece blanket has been hanged. |
|
|
|
|
|
|
Well everything went smooth, I think this solution will work very well on my roadtrip! Next I will install an extra battery. More on that later!
Friday, August 22, 2014
Preparing the Toyota Starlet for sleeping in it
How am I gonna sleep in the Toyota Starlet you may ask?
Let me tell you. The approach to the "new" car was a bit different than the Kia. On the Kia Pride I could push the front seats forwards (max) and recline the backseat to make it "almost" flat towards the backseat. That solution was not possible with the Toyota Starlet. Yes! Of course I tried it, don't make me out to be a fool. ;)
So... on the Toyota I decided to remove the front passenger seat. (Yes, I might have showed this before, but it was a long time ago, and you probably have forgotten it haven't ya?)
I also removed the sitting seat ( in the back so that the backseat could be folded almost flat to the boot floor.) Are you getting anything of what I´m trying to explain here? I guess not, ...
..anyywaaaaay...
Ok, so when the seat was out, I had to find something to support a bigger board (that I took from an working office desk, which I earlier scrapt). So.. I found a cooling box and a plastic box that fitted not perfectly, but "ok" according to my "standard".. I will explain more in the pictures that follows.
|
|
|
|
Til next time, bye!
Subscribe to:
Posts (Atom)



















































